Installing your remote control
* 10m range is dependent on obstacles between the remote and shower controller, building materials,
and the construction of the property. For optimal performance, the controller should be in direct line
of sight with the remote.
The remote control can be used to switch your shower on and off without reaching
into the showering area. It’s wireless, for a simple installation. Once your shower has
been installed, decide where you would like to position the remote control. It can
operate the shower from up to 10 metres away*. Prior to fitting to the wall, ensure
there is a strong and consistent signal. To test; seat the remote in the mounting
bracket, position in the desired location and operate the remote. To fix to the wall,
peel off the backing paper from the mounting bracket and position it in the desired
location. Press it to the wall for 2 to 3 seconds to ensure it is securely fitted.
We recommend charging the battery prior to pairing the remote.
When you are ready to pair your remote control, wake up the
controller and navigate to the
Settings menu. Move the lever to
navigate to
Pair a remote.
Push the lever to enter. You will be prompted to press the
remote button until the LED flashes.
Press the button on the remote until
the blue, white and red LED lights flash
to confirm the pairing.
On the controller a message will
appear to confirm the pairing, it will then return to the
Settings
menu. To return to
Home rotate the temperature bezel.
Pairing your remote control
