4
(2).Theoretical sketch:
Note
d
:
：
Our company reserves the right to change any product specifications
and parameter without notice and without incurring any obligations or liabilities
for such changes.
3.
Unit
Installation
(1). Overview
Please install the machine in a place of
use
, k
eep the unit 4" away from the
wall and leave enough space for both sides of the unit. In order to insure the
water quality, please use our company original settings.
(2).
Water Supply Connection:
Please keep the machine in the place nearby the water supply (not more than
10
Feet)
, the water pressure should be configured with between
15 and 60 PSI
.
Please make sure there are accessories ball valve, inlet 3 ways, elbow,
10' Ft
tubing
two way PE water pipe.
The ball valve
must be installed between the
machine and the water
line, to
make sure that
it'
s easily be maintained.
A
.
C
onnect the inlet 3 ways to tap (Picture 1), to be sure there is no leakage.
Picture 1
Picture 2
B.
Twist the ball valve 12-15 rounds thread seal tape (to
in
sure air tightness)
，
connect it on inlet 3 ways
，
at last connect two way PE water pipe to inlet 3 ways
（
Picture 2
）
