AQUACLAVE Manual Flushing Membrane System
Introduction of AQUACLAVE
®
RO P5
Manual Flushing Membrane System
Incorporating the best Reverse Osmosis (RO) technology the built-in manual
flushing membrane of the AquaClave
®
RO P5 brings you premium water
with less than 1 ppm in total dissolved solids quality at your finger tips! This
special easily-operated function can extend the service life of the RO
membrane. It also provides the ability to wash away carbon fines when
changing filters. AquaClave
®
RO P5 provides the quickest way to know the
quality of your water. The system is capable of removing over 99% of total
dissolved solids, +99% of all organics, and +99% of all bacteria.
AquaClave
®
RO P5 meets all different water quality needs. The total dissolved
solids (TDS) test meter should be used on every ocasion when drawing water
for use.
Specifications
•
Production: 50LPD
•
240Volt (50/60Hz) with a transformer
•
Safety approval: TUV (EN60950) & CE MARK
The system has been designed to comply with Australian electrical
standards
•
Special technical designs (Patented No.068018.flush membrane)
•
100% factory tested and sterilized ready for installation
•
Operation pressure:5-80 PSI
•
11 litre NSF standards water storage tank
•
FDA approved polypropylene made flat cap housing (double O’ring)
•
Automatic shut-off valve
•
Flow restrictor
•
Stainless steel check valve
•
Long reach attractive faucet suitable for the application
•
Feed water connector and delivery valve
•
Drain saddle valve
•
Four color coded 1/4 inch tubing for system conneciton
•
Completely assembled and water leak tested
•
TDS meter
•
Dimensions: (cm) 47 (L) x 20 (W) x 42 (H) - System
(cm) 28 (L) x 35 (W) x 28 (H) - Tank
•
Weight: 12 Kg - System
4 Kg - Tank
01
