5
Fig. 3
Flow Control
Valve
In-Line
Strainer
Fluid Level
Gauge
Hose
Connection
C
ONTROLS
/ F
EATURES
The volume of fog can be regulated by adjusting the
Flow Control Valve. (See
Fig. 3
)
Particle size is smaller at lower outputs, so it is
better to operate the unit at a lower output for longer
periods of time.
At the base of the plumbing is an in-line strainer with
a removable cap. Periodically check inside and flush
any sediment from the screen. (See
Fig. 3
)
The HRSM is equipped with a four position pivoting
fogging head with 15º intervals up to 45º.
Propelling the fog upward allows more time for the
particles to evaporate, keeping floor areas drier.
When making an adjustment, balance the weight of
the fogging head off of the pin for easy removal.
(See
Fig. 4
)
Flow Control /Strainer /Pivot
Fig. 4
Adjustment Pin
►
▼
▲
OFF
ON
I
NSTALLATION
A) Automated Operation
Connect the unit's power cord to a
power supply controller and switch
on the unit's toggle switch.
B) Manual Operation
Plug unit into an available dedicated
20A power supply and use the
unit's On/Off toggle switch to control
operation.
S
ETUPS
Power
On/Off
►
Automated Power
Supply Controler
Liquid Supply
Hose Connection
Liquid
Storage
Atomized
Liquid
20A Dedicated
Power Supply ►
On/Off
Toggle
Summary of Contents for HRSM-1500
Page 14: ......
