I
H
Step 4 : Inset the bubble seal(No.10) onto the arm rail profile(No.11). (Diagram D)
Step 5 : Drop a little bit of silicone sealant into the arm rail profile (No.11) then press the
CORRECT
handed end cap
(No.18) into the arm rail profile(No.11) (Diagram E)
Step 6 : Fit the washers(No.8,No.9 ) onto the arm rail profile(No.11) (Diagram F).
Step 7 : Fit the assembled arm rail above onto the wall profile then insert the bolt (No.3) to secure the arm rail profile.
Step 8 : Push the bath screen assembly onto the wall profile (Diagram H).
Step 9 : Drill 3 equally spaced holes with a 3mm drill bit through the wall profile into the frame(Diagram I)
Step 10 : Fix the bath screen assembly to the wall profile using the screws ST4 x10 (No.6). (Diagram J)
Step 11: Press the cover cap(No.7) into the hole at the top of the wall profile(Diagram K)
Left Handed
Note:Follow the steps below to assemble the bathscreen into a right hand version. The bathscreen is pre-assembled
in left hand format”. Loosen the bottom rail holder piece from the bath screen assembly ( Diagram L ) and attach the
right handed bottom rail holder ( Diagram M ).
K
Ф3 drill bit
4x10mm screws
J
left
right
L
M
(Diagram G).
