AquaCare AS90000, Installation & Operation Manual

Page: 16 / 44

16 AquaCare: Installation
Inserting the fluid container
BEST BEFORE END:
SEE BASE O F BOT TLE
MEDIVA NCE INSTRUMEN TS LT D.
BARR ETTS GREEN RO AD
LONDON NW10 7AP UK
TEL: +44 2 0 8965 2 913
EMAIL: s ales@v elopex .com
For use with t he V elopex
Aquacut / AquaCare Range
AquaSol.
Contains no significant quantities of hazardous
materials.Water Based Solution containing 17.5%
w/w Ethano l
Ne contient aucune quantité importante de
matières dangereuses. Solution à base aqueuse
contenant 17,5% w/w d'éthanol .
Enthält keine gesundheitsschädliche
Inhaltsstoffe:Lösung auf Wasserbasis, enthält
17,5% w/w Ethanolalkohol.
Contiene una piccola quantità di materiale
pericoloso. Soluzione a base di acqua contenente
un 17,5% w/w di etanolo.
No contiene una cantidad importante de material
peligroso. Solución acuosa. Contiene 17,5% w/w
de etanol .
Coep e a e oe o ec o o ac x
aep ao
Bo pac op, coep a 17,5% oo o
c pa
Informatio n
Holding the fluid container with the lid upward, turn the container over and insert into
the rear water socket as shown in figure B. Push down with light pressure to ensure
that the needle punctures the seal.
NOTE: The containers are NOT refillable and must be replaced as required, remove
the empty container and replace as shown.
I/ASS 8200F
WARNING: The above fluid container is filled with a 17% alcohol solution. This
acts as a biostatic solution in order to reduce biological growth within the fluid
system. NOTE: Not for human consumption.
Should the AquaCare unit be used with another solution obtained by the user,
this must provide the required biostatic effect to ensure the machine’s fluid
system cannot sustain biological growth.
Failure to follow these guidelines could lead to user or patient contracting an
infection or contagion.