Page - 23
Reset to Factory Defaults Settings
NOTICE
Failure to heed the following may result in damage to equipment.
l
Using this option will reset ALL settings to their factory defaults including external controller settings
and sensor calibrations. DO NOT perform this operation if unsure of site specific settings or how to
reset them on the chiller.
l
If a qualified technician is unavailable, please
see "Contacting AquaCal AutoPilot, Inc." on page 1.
1. Simultaneously Press "Pool / Spa" button and "Up" button
until the display shows
888
.
2. Release buttons. Reset is complete.
1.7 Cleaning Equipment After Installation
Installer - If you need to clean equipment after installation, please use the following guidelines.
WARNING
Failure to heed the following may result in injury or death.
l
Possible electric shock hazard - Deactivate power to all electrical devices on the pad when washing chiller. Do not
restore electrical power until equipment is completely dry.
NOTICE
Failure to heed the following may result in damage to equipment.
l
Do not use a pressure cleaner to wash chiller. Damage to chiller components may result. If using a hose-end spray
nozzle adjust spray pattern to low strength only.
l
Do not spray water directly into the interior of the chiller; damage to components may result.
l
Do not use chemicals on the display panel.
Cleaning
1. Wash outside cabinet using a low-pressure water hose. A high-pressure water stream will cause damage to the
aluminum fins of the chiller. This damage is not covered under product warranty.
2. While the chiller is still wet, use an approved cleaning agent to clean the exterior of the chiller.
Do not use
chemicals on the display panel.
3. Use a detergent-dampened cloth to wipe the chiller's exterior cabinet.
4. Flush all exterior with fresh water using a low-pressure water hose.
5. Dry the exterior cabinet using a soft cloth being careful not to damage evaporator fins being careful not to damage
condenser fins.
APPROVED CLEANING AGENTS
•
Fantastic
®
Formula 409
®
Cascade
®
All Power Plain Detergent (3% Solution)
Table 3 - Cleaning Agents
