Page - 26
2.2 Weights
NOTE:
Specifications subject to change.
Model Type
Model Number
Install Weight
TropiCool
®
TC500
215 Pounds
TropiCool
®
TC1000
285 Pounds
TropiCool
®
TC1500
328 Pounds
Table 5 - Equipment Weight
2.3 Cooling Recommendations
The following recommendations will reduce the amount of time required to cool a pool or cold plunge
application.
If unsure of equipment cooling capability, review equipment data plate.
Model Specifications" on page 25.
1. Confirm chiller mode has been set to cooling mode.
2. Set thermostat to desired water temperature.
3. Temporarily set the filter pump for continuous operation.
l
This will allow the Chiller the time required to cool the water at start-up.
l
After the water has reached the desired temperature, reset the filter pump to normal operating time-frames.
2.4 Available Accessories
Accessories may be purchased through an authorized dealer of AquaCal
®
products.
Bypass Valve Kit (# STK0135)
l
When high flow rates are outside recommended
specifications, please use this kit or an alternative bypass
valve system.
l
This kit can be used to control excessive water flow
through the chiller. It provides automatic flow adjustments
for most applications.
Condensation Drain Kit (# STK0202)
l
Used when condensation water flow must be directed to a
specific location.
