AQUA Sauna Heater
12 E002B-23-10-12
(Fig 10)
The control wire should plug into the silver / black din socket on the PCB of the main OCB control box.
4. Installation for Temp Sensor
Install the temperature sensor on the height between 1500-1800MM in sauna room
Open the cover with a screwdriver
Fix the bottom of the temperature sensor on to wall with screw
Replace the cover.
(Fig 11)
5. Sauna heater, Control box ,controller ,light ,fan and temperature sensor connection drawing
(Fig10A, Fig 10B, Fig 10C)
6. Door interlock install the switch following the manufacturers instructions and connect the wires
back to the control box as shown in figure 10A.10B.10C below
OC-SB
Controller
6
2
5
Terminal 1
Sauna heater
2
Fan
Door InterLock Switch
INPUT POWER
400V 3N~ 50/ 60Hz
OCS-B Control BOX
Temperature Sensor
lamp
Terminal 2
5
2
4
5
(Fig 12)
7. Heater Guard (not supplied)
The heater should be guarded against accidental contact with a wooden guard similar to the one shown
Summary of Contents for ZL 10.5
Page 1: ......