Outdoors Insight Inc. 9
Using the Aqua-Vu Controls
The Aqua-Vu has the following controls located below the monitor and on the base.
On/Off
— The ON/OFF Power button
turns the monitor and camera On or Off.
After tuning on the Aqua-Vu, the screen
may take several seconds to appear. When
On, you will see the IR, above the button,
illuminate. Press and hold the power
button until the IR turns on/off.
Video Out
— With the convenient Video-
Out located on the front of the monitor,
you can easily connect your Aqua-Vu to
any TV/LCD/SONAR that is equipped
with a yellow Video-Input. (Cable Sold
Separately)
Power –
This jack allows you to
plug
in the 12-volt power cord with cigarette
adapter (included). Using this power cord
provides a trickle charge to the battery and
will power the unit. The unit must have
a functioning battery to operate. If the
battery is completely discharged, it will
take a few minutes to re-charge the battery
enough to power on the unit.
Monitor –
buttons will be backlit
if ambient light is low. Auto on/off in
approximately 4 seconds.
Camera
Light
+/- to adjust
brightness
