aqua-pure AP-RO5500, Installation, Operation And Maintenance Instructions

Page: 17 / 20

Installation, Operation and Maintenance Manual
15
General Undercounter Installation Schematic (Figure 1)
General Basement Installation Schematic (Figure 2)
Feedwater Valve Installation (Figure 3)
Faucet with
Air Gap
Cold Water
Supply Only
Storage
Tank Sink
Drain
Red SFC Tubing
3/8” Black
3/8” Yellow
3/8” Blue
RO
Assembly
1/4” Orange
1/4” Green
For best flow, tubing must
be as vertical as possible.
3/8” Yellow
For best flow, keep
tubing from Tank
to RO Assembly as
short as possible.
Faucet without
Air Gap
Cold Water
Supply Only
Storage Tank
Sink
Drain
Red SFC Tubing
3/8” Yellow
1/4” Green
3/8” Blue
RO
Assembly
1/4” Orange
Air gap device
(eg. Gap-A-Flow)
To laundry sink
standpipe or floor
drain
Floor
Undersink Area
For best flow, keep
tubing from Tank
to RO Assembly as
short as possible.
For 3/8” OD tubing use side of
bracket with projections For 7/16” - 1/2” OD tubing or rigid
pipe use “V” side of bracket
nut/seal
piercing
lance
insert
plastic sleeve
compression nut
1/4” orange
feed water
tubing
IMPORTANT NOTES
• Some state and local plumbing codes may
prohibit the use of saddle-type valves and/or
drain connections. The use of saddle-type
valves are prohibited in: Alaska, Delaware,
Idaho, Kentucky, Massachusetts, Michigan,
Minnesota, New Hampshire, North Dakota,
Ohio, Oregan and South Dakota. Check
your local plumbing codes for any restrictions
that apply.