Aqua Phase
, A Division Mid-State Stainless Inc. ●
330
W.
Benson Ave. ●
PO Box 228 ●
Grantsburg, WI 54840 ●
USA
800-208-9274 ●
715-463-5851
●
FAX: 715-463-5853
● Email: [email protected] ●
WEB: www.aqua-phase.com
Switch
Options/Function
“
STOP
” Button
When pressed, will stop all
Aqua Phase
wash functions
“
START
” Button
Must be pressed to start any
Aqua Phase
wash function
Allows you to select the length of wash:
WASH TIME
Selector Switch
“
3 MIN
” =
Three minute wash cycle
“
5 MIN
” =
Five minute wash cycle
“
7 MIN
” =
Seven minute wash cycle
“
RUN/DRAIN
” Selector Switch
“RUN”
: Set to “
RUN
” to wash an item.
“
DRAIN
”: Set to “
DRAIN
” to drain the water in the
machine.
*WASH MODE
Selector Switch
The water should be drained when you are done washing for
the day or if you relocate the machine. In order for the
“DRAIN” function to work, the Wash Mode switch must be
set to “CLEAN & DISINFECT” or “CLEAN ONLY”.
“
CLEAN & DISINFECT
”: When this mode is selected,
Aqua
Phase will perform a complete wash and rinse for the time
specified on the WASH TIME Selector Switch. It will then
automatically apply disinfectant solution
“
CLEAN ONLY
”: When this mode is selected,
Aqua
Phase
will perform a complete wash and rinse cycle for the
length of time specified on the WASH TIME Selector
Switch. It will not apply disinfectant.
“
DISINFECT ONLY
”: When this mode is selected,
Aqua
Phase
will apply disinfectant solution only. It will not wash
or rinse.
*
Wash Mode selection is part of the
Disinfectant Application System
option if purchased.
3
GENERAL IN
F
ORMATION
CONTROL PANEL SWITCHES
& FUNCTIONS