1.
1. Load the item
to be washed into wash chamber and close the front door.
a.
a.
b.
b.
2.
3.
4.
4.
5.
5.
Operating Procedures
1. The current status of the Aqua Phase system ("Wash cycle", "Rinse cycle", "Cycle complete", etc.) will be
shown
on the LCD display of the control panel.
2. After pressing the "
START
" button, the computer will check to see if there is water in the water reservoir. If the
reservoir is not full of water,
Aqua Phase
will automatically fill to the appropriate level. The reservoir holds
approximately 5.5 gallons.
3. When the reservoir is full, the pump will start and begin the wash cycle, spraying the item being washed.
AQ-240
Cleanin
g
Solution
is automatically injected shortly after the wash cycle begins.
4. The Aqua Phase will now be in the wash phase, and will continue for the wash time selected of 3, 5, or 7
minutes.
5. When the wash phase is complete, the dirty wash water will be pumped out of the
Aq
ua Phase
to the drain.
6. Aqua Phase will automatically refill to the appropriate level with fresh water.
7. After the reservoir is filled with water, the pump will start and the Aqua Phase will begin the rinse phase. The
AQ-260 R
inse
A
gent is automatically injected shortly after the rinse phase begins. The rinse cycle will last for
approximately 90 seconds.
8. If you have the Disinfectant Application System, the cycle will
automatically be
g
in
if
CLEAN & DISINFECT
w
as selected.
•
To Drain the Machine Manually:
•
During normal automatic operation, the rinse water remains in the machine and will be the wash water for the next
item placed in the chamber. If you choose, you may drain the rinse water prior to beginning the next wash cycle.
•
Set the "RUN/DRAIN" switch to "DRAIN".
•
Push the "START" button. The machine will drain the water.
Prior to beginning the next wash cycle, set the "RUN/DRAIN" switch to "RUN".
When the next wash cycle begins, the machine will automatically fill with fresh water for the wash phase
Aqua Phase
, A Division Mid-State Stainless Inc. ●
330
W.
Benson Ave. ●
PO Box 228 ●
Grantsburg, WI 54840 ●
USA
800-208-9274 ●
715-463-5851
●
FAX: 715-463-5853
● Email: [email protected] ●
Aqua Phase Wash Sequence Description
13
OPERATING PROCEDURES
& WASH SEQUENCE