background image

Inspiring Excellence  in Fish Care!

Australian Consumer Law.

In Australia the Aqua One guarantee applies in addition to the guarantees that can not be excluded under the Australian Consumer Law. You are 

entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also 

entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

About this Guarantee

The Manufacturer or Distributor, of Aqua One goods, is collectively known herein as “Aqua One”. Please refer to contact details for Aqua One below or on the 

applicable Aqua One website. Any product that is covered by its own guarantee (as enclosed with the product) is subject to the conditions of that guarantee. 

The benefits given to the purchaser, under guarantee, are in addition to all other statutory rights and remedies which the purchaser has in respect of products 

under legislation in the applicable country of purchase. This guarantee shall not affect any such rights and should be read subject to such legislation.

Terms and conditions of your Aqua One Guarantee

1. The Aqua One guarantee becomes effective from the date of purchase.

2. You must provide the proof of purchase before any repair or replacement of your Aqua one product are considered when requesting a guarantee service. 

3. All products subject to guarantee service should be prepared for transportation in the original packaging or other comparable packaging which offers the 

same degree of protection.

4. Where products are repaired or replaced under guarantee, these products are guaranteed for the remainder of the original guarantee period, where permitted 

by local law.

5. Where claims on inspection reveal goods are in normal working order, Aqua One will request reimbursement of all reasonable costs incurred.

6. Where Aqua One determines the products are being used in a manner contrary to the intended purpose/use, instructions, specifications or this Guarantee, 

Aqua One reserves the right to terminate the guarantee and will provide written notice to the purchaser.

What is covered:

1. Aqua One warrants to the purchaser, for 1 Year from date of original purchase, to repair or replace products where fault is found due to defective materials or 

faulty workmanship and where goods do not operate in accordance with the instructions.

2. The guarantee covers any other products as enclosed with the product unless those products are provided with their own guarantee.

What is not covered

Where permitted by local law, the following exclusions and limitations apply in regard to the guarantee:

1. Acrylic scratching, for whatever reason caused after purchase.

2. Product guarantee service where fault is due to, but not limited by a) misuse b) neglect c) abuse d) fire or flood e) normal wear and tear f) accidental breakage 

g) Acts of God h) mains voltage fluctuation or supply problems i) connection to any voltage other than what is stated on the rating plate j) modification or 

tampering to electrical cord or plug, k) vermin, insects or foreign objects l) liquid spillage or submersion of goods not designed to sustain such use or duress.

3. Where inspections reveal the products are in normal working order including where noise or vibration is consistent with normal product operation.

4. Attempted repairs or modifications by unauthorised persons, including but not limited to the drilling of holes in the aquarium glass by unauthorised persons.

5. Where the product’s factory rating plate has been removed, altered, damaged or is rendered illegible.

6. Where products are not installed, operated or maintained in accordance with Aqua One’s product instructions, specifications or this guarantee.

7. Replacement or repair of worn consumables such as impellers and shafts.

8. Replacement of lost products, parts or components.

9. Costs associated with products transportation, removal, installation, postage or cost of insurance.

10. Any damage incurred whilst installing, transporting or moving the goods.

11. Subject to certain local statutory rights and obligations to the contrary, and this guarantee shall not affect those rights or obligations, where, to the full 

extent permitted by law: 

1

. all express and implied warranties and conditions under statute or general law, are expressly excluded and Aqua One, where 

permitted, will limit liability as follows and at Aqua One’s option to: in regard to products either a) the replacement of goods or supply of equivalent goods b) 

the repair of products or the cost of replacing the products OR of acquiring equivalent products OR in regard to services either c) the re-supply of services d) the 

cost to re-supply services. 

2. 

Aqua One will not be liable for any loss or damage, including consequential loss or damage either directly or indirectly, or for any 

incidental expenses, of any kind, and in any way whatsoever.

Aqua One may be contacted in:

Australia   

 

          Hong Kong 

 

 

 

New Zealand  

 

     United Kingdom

Kong’s (Aust.) Pty. Limited 

          Kong’s Aquarium Supplies Co., Ltd 

 

Kong’s (NZ) Limited    

     Kong’s (UK) Limited,

PO Box 863, Inglebur  

          No 31, 3/F Thriving Industrial Centre   

PO Box 15 - 183, Tauranga  

     C/O Aqua Pacific UK Ltd.

1890 NSW Australia   

          26-38 Sha Tsui Road, Tsuen Wan, 

 

3015 New Zealand   

     PO Box 268

www.aquaone.com.au 

          Hong Kong 

 

 

 

www.aquaone.co.nz   

     Romsey Hampshire, SO51 0WW

 

 

 

          www.aquaone.co.hk 

 

 

 

 

 

     United Kingdom

            

 

 

 

 

www.aquaone.co.uk

A

QUA 

O

NE 

1

 

Y

EAR 

G

UARANTEE

Australia: 

www.aquaone.com.au   

New Zealand: 

www.aquaone.co.nz   

United Kingdom: 

www.aquaone.co.uk  

All other countries: 

www.aquaone.com.au

C

USTOMER

 

C

ARE

C

USTOMER

 

C

ARE

 

Thank you for choosing this Aqua One product.
Your Aqua One product is covered for parts and labour for 1 year from the date of purchase as 

detailed in the terms of the Guarantee below. For any inquiries or concerns regarding this product 

or any of our products, please do not hesitate to contact your local Aqua One Retailer or visit Aqua 

One Customer Care online in your country of purchase via the websites listed.

Summary of Contents for ReefSkim 300

















Reviews: