background image

Inspiring Excellence  in Fish Care!

Place the glass lid somewhere safe 

where it will not be broken while 

you are servicing the aquarium. 

 

The fish and plants do not need to be removed 

when doing regular maintenance.

Place a towel on the floor in front of the aquarium 

in case of water spillage.

M

ONTHLY - FILTER MAINTENANCE

Remove filter lid and 

disconnect return 

duckbill.

Remove glass lid and 

light unit.

Remove filter from the 

aquarium.

Lift out pump assembly 

from filter body.

Remove elbow, intake 

strainer, impeller cover 

and then the impeller. 

Use a pipe brush* 

to clean all pump 

components, paying 

particular attention to 

the impeller well.

Remove sponge and 

carbon cartridge. If 

the carbon cartridge is 

due for replacement, 

discard it.

Remove some water 

from the aquarium and 

rinse the sponge and 

carbon cartridge.

Rinse all other 

components of the 

filter to remove any 

debris or algae. 

Replace all equipment on the 

aquarium. Check that your 

hands and power plugs are 

dry, and turn power back on.

Check that all equipment is 

working correctly over the 

next half hour.

impeller well

Take care not to lose small parts when 

servicing the aquarium, especially when 

cleaning filter components at a sink.

Inspiring Excellence  in Fish Care!

*sold separately

Summary of Contents for Dynamic 58













Reviews: