background image

S

ETTING

 

U

Consider where 

you are going 

to place the 

aquarium. Avoid 

direct sunlight and areas 

that experience large 

temperature fluctuations 

such as near heaters or 

air conditioners.

1L=1kg

Place the aquarium 

cabinet on a level 

surface strong enough 

to support the weight 

of the aquarium, all 

equipment, substrate, 

ornaments and water 

in the aquarium. 

 

Note that water is heavy 

(1kg per litre).

I

NSTALL 

F

ILTER 

A

DD

 D

ECOR

Attach suction cups and mount on the back wall 

of the aquarium.

Rinse aquarium 

gravel* well. 

Gently pour the 

rinsed gravel into the 

aquarium.

Rinse ornaments* 

and place into 

the aquarium as 

desired. 

Ensure that all ornaments are securely placed 

so that they cannot fall over, which may harm 

aquarium inhabitants and damage the aquarium.

P

LACE 

A

QUARIUM

Assemble cabinet according 

to the instructions included 

with the cabinet

Place aquarium 

on cabinet

*sold separately

If you 

wish to 

keep 

tropical 

fish, 

install a heater* near the 

filter as shown. 

Do not plug the heater 

in unless it is fully 

submerged in water.

Summary of Contents for Dynamic 58













Reviews: