background image

3

SAFETY CHECK LIST & SAFETY WARNING 

•  Always wear an approved Personal Flotation Device (Life Preserver).

•  Be aware of your local boating rules and regulations and abide by them accordingly.

•  Check inflation levels each time before you go out and inflate your boat for a full 24 

hours before undertaking long trips.

•  DO NOT allow children to use Aqua Marina unsupervised.

•  DO NOT consume alcohol while boating or operating a boat while under the 

influence of alcohol or drugs.

•  DO NOT drag your Aqua Marina over rocks or gravel if it can be avoided.

•  DO NOT exceed the certified maximum capacities of this boat under any 

circumstance.

•  DO NOT go boating alone.

•  DO NOT use compressors, co

² or compressed air for inflation, only use Aqua Marina 

    recommended pumps.

•  DO NOT use your Aqua Marina Boat as a personal flotation device as they are 

designed for leisure/recreation in mind.

•  DO NOT sleep inside of your Aqua Marina while on the water.

BT-

UD250

BT-

UD298

BT-

UD350

Category

Model

D

C

C

Item size

8’2”x55”

(2.5×1.4m)

9’9”x61”

(2.98×1.55m)

11’6”x63”

(3.5×1.6m)

Max. Air 

pressure

0.25bar/3.62psi 

Hull

1bar/15psi 

Floor

0.25bar/3.62psi 

Hull

1bar/15psi 

Floor

0.25bar/3.62psi 

Hull

1bar/15psi 

Floor

No. of air 

chamber

3+1

3+1

3+1

Max. 

Passenger

2+1

3+1

5

Max. 

Payload

280 kg

(616 lbs)

360 kg

(792 lbs)

480 kg

(1056 lbs)

Max. Motor

Power

5HP/

3.7KW

15HP/

11.03KW

20HP/

14.7KW

Net

weight

25 kg

(55.1 lbs)

28 kg

(61.7 lbs)

34 kg

(75 lbs)

1. As per Directive 2013/53/EU boat  Design Category C - Inshore: Designed for 

voyages in coastal waters,large bays, estuaries, lakes and rivers where conditionsup 

to, and including, wind force 6 and significant wave heights up to, and including, 2m 

may be experienced.

2. Maximum person’s capacity without console

3. Manufacturer’s recommended maximum load capacity

4. Maximum motor power 

5. Manufacturer’s recommended working pressure

6. Hull identification number (HIN)

7. Net weight 

INFLATABLE BOAT SPECS & FEATURES

SPECIFICATIONS

Summary of Contents for BT-UD250
















Reviews: