8
CONCLUSIONS
It follows then that your pool must have an adequate circulation,
chlorination and filtration system and the pH should be in the correct
range.
The use of
Pool Stabiliser
(iso-cyanuric acid) in hot weather will help
keep a reserve of chlorine in the pool.
MAINTENANCE
CLEANING OF THE CELL
Check at weekly intervals to determine amount of deposit (calcium etc.)
on the electrodes. A heavy build-up may interfere with the flow of
electrical current and subsequently the production of Chlorine. It may
also damage the anode electrodes and cause damage beyond repair.
1.
Switch off the filtration and Chlorinator and close valves.
2.
Unscrew cap in an anti-clockwise direction.
3.
Remove electrode holder and soak electrodes in very hot water and
detergent.
4.
If ineffective, we recommend you immerse the Cell in Lo-
Chlor “Cell
Clean”
. Soak for 30 minutes or until clean and rinse in clean water.
5.
Insert electrode holder into Cell body, ensuring
locating lug
is at top
of cell.
6.
Lubricate “O” ring using only silicon grease for complete sealing.
7.
Open valves, turn on filtration and chlorinator.
8.
Check Chlorine monitor reading.
