4
e)
CAUTION
. It is very important that no gas generated from the
Cell can find its way back into the Filter Pump, Heater, Solar
Systems or Spa Blowers.
f)
When position to install Cell has been decided, turn off Filter
AND CLOSE OFF VALVES.
g)
If Return to Pool Line is 40mm pipe, use 50-40mm reducers
provided. If50mm pipe, glue pipe/fittings direct to inlet and outlet
ports.
4. POWER PACK / CELL CONNECTION
a)
The Cell is supplied already connected to the Terminal Box under
the Power Pack.
b)
If it is necessary to disconnect the cell lead, re-assemble as follows:
i.
Attach Blue wire of cell lead to Blue wire of Terminal
Box.
ii.
Attach Brown wire of Cell lead to Brown wire of
Terminal Box.
iii.
Attach small Black Sensor lead wire to centre terminal.
NOTE: The unit cannot function if wired incorrectly and will void
warranty.
5. PUMP / CHLORINATOR LEAD CONNECTION
a)
Insert Pump plug lead into 3 pin socket underneath the Power Pack.
b)
Insert Chlorinator plug lead into power point.
NOTE: Do not plug more than 1 pump into socket underneath
Power Pack.
