Tr
ouble Shooting
Tr
ouble Shooting
If the control trigger is pressed and the motor driver does not respond or function properly
1. Check whether the battery compartment is attached to the driver firmly and ensure that
the battery is fully charged. Also check whether there are any obstacles around the spring
mechanism of the motor unit bracket that may affect the operation of the spring control
2. If the tension of the control wire is incorrect, the motor may not start when the control trigger is
released. Adjust when necessary as per the following instructions:
-Unlock the control wire cable by rotating the locknut counter clockwise as indicated in
diagram
17
-To increase the tension of the control wire cable, rotate the tension barrel counter clockwise
a few turns and hold in place as indicated in diagram 17
-To loosen the tension of the control wire cable, turn the tension barrel clockwise
-Upon completion of the adjustment, the control wire cable must be locked tightly by
rotating the locknut clockwise as indicated in diagram 18
diagram 17
diagram 18
7
7
LOCK NUT
TENSION
BARREL
Summary of Contents for SA 3995
Page 2: ......
