AQUA FORTE INVERSMART, Manual

Page: 103 / 120

13
3.
Operation instruction
a.
Screen Lock
1)
Press “ ” for 3 seconds to lock or unlock the screen
2)
Automatic Lock Period: 30 seconds if no operation
b.
Power On
Press “ ” for 3 seconds to unlock screen. Press “ ” to power on machine.
c.
Temperature Setting
When the machine is on, press and to set temperature.
d.
Boost/Silence Mode
Press “ ” to switch among boost mode , silence mode
Please choose boost mode for initial heating
e.
Heating / Cooling /Auto Mode(heating & cooling models only)
Press “ ” to switch among heating ” ”, cooling ” ” and auto mode ” ”.
Heating mode “ ”: Water temperature setting range(18-40°C)
Cooling mode “ ”: Water temperature setting range(12~30°C)
Auto mode “ ”: Water temperature setting range(12~40°C)
* When water inlet temperature is higher than setting point, automatic cooling mode starts.
* When water inlet temperature is lower than setting point, automatic heating mode starts.
f.
Defrosting
3)
Automatic defrosting: When machine is auto defrosting, will flash, and return to previous
working mode when it finishes.
4)
Manual Defrosting: To enter forced defrosting mode, the compressor must be working more than 10
minutes. in heating mode, press “ ” and “ ” on touch controller simultaneously for 5
seconds to start forced defrosting, ” ” is flashing and defrost starts, “ ” stop flashing and
defrosting stops.
(Remarks: the interval between forced defrosting should be more than 30 minutes.)