1 6 |
P a g e
4-20 mA
Module Check
OR
Ethernet
Module Check
OR
Remote Alarm
Module Check
OR
A final module screen is displayed showing which specific modules were initialized.
The controller then displays the lamp optimization screen for 60 seconds to allow the lamp to
reach its optimum output. Finally, a final “start-up complete” screen is displayed. The system will
now be ready to disinfect water flow.
all detected modules
lamp reaching max output
successful start-up
AQUA FLO Operational Screens
On systems without the UV monitor, the default screen shows the
AQUA FLO Home Screen
. At
any point during operation the user is able to scroll through the
AQUA FLO Home Screen, Lamp
life remaining
and
QR Code/Contact Info
screens by pressing the button located on the front of
the controller.
