6
CONVERTING THE WALKER TO STANDARD
The Under Water Walker can be used with the armrest cradles, or the armrest cradles can
be removed for use as a “standard” walker. To convert the Under Water Walker to a
standard walker, follow the following steps;
1] Remove the four (4) Wing Nuts from underneath the armrests (no tools required).
2] Remove the four (4) ¼” x 2-1/4” Button-Head Cap Screws from the Cradles.
3] Remove the Armrest Cradles. Save the Cradles and the hardware for reattachment.
THE STANDARD CONFIGURATION WALKER:
In the “Standard” configuration the armrests become
hand grips, as shown in the photo. To use the Under
Water Walker in the standard configuration it must be
adjusted lower so that the arms are slightly bent at the
elbow when walking. In any case, adjust the height for
optimal comfort before using.
