background image

To ensure the batteries are kept in good condition, 
always put the hoist on charge after use. Never allow 
the battery to fully discharge.

Charging

To ensure a long service life of the batteries, please ensure 
that the hoist is left on charge when not in use.

To charge the 

AirRise

200

, follow the following procedure: 

• 

Place the hand control in the wall charger (Figure 1) 

• 

Check if the indicator light lights up (Figure 2) 

• 

Leave hoist on charge for about 8 hours.

Figure 1:

The wall charger

Figure 2:
Charging indicator light

Hand Control

The plug of the hand control should be placed firmly in the input at the bottom of the 
lift. The cord of the hand control can, if requested, be fitted with a strain release or 
fixed with screw-thread.

Top 2 buttons:

These control the hoist’s lifting and 

lowering

Middle 2 buttons:

If the hoist is fitted with a electrically 

powered spreader bar, these buttons enable 

this to be used.

Indicator light:

In the middle of the letter ‘O’ in INNOVA™, there 

is an LED indicator light. This tells you when the 

hoist is charging.

Bottom 2 buttons:

Turn the hoist on and off. When charging, the LED 

indicators light up at the bottom of the hoist. Should 

this be annoying, for example in a bedroom, this can be 

turned off with the red button. There is also the option of a 

bedroom mode, with which the charging indicators switch 

off automatically after 2 minutes.

The 

most innovative 

healthcare equipment in the world.

t   

|

    0345 034 1450

f   

|

    0345 034 1451

e  

|

    [email protected]

www.innovacareconcepts.com

Quick User Guide

Reviews: