![background image](http://html.mh-extra.com/html/aqua-creek/under-water-walker-f-605uw/under-water-walker-f-605uw_user-manual_2958235004.webp)
4
ADJUSTING THE UNDER WATER WALKER
TM
The Under Water Walker is easily adjustable for height. It is adjustable in one-inch
increments from 32” to 45”, measured from the floor to the armrests. To adjust the
height;
1] Remove the four (4) 5/16” snap-pins.
2] Slide the Upper Assembly up or down until the desired height is obtained.
3] Replace the four (4) snap-pins and snap the clip over the pin to hold it in place.
HINT: Count the holes from the bottom up to the desired hole/location to make sure all
four snap-pins are at the same height. If the armrests/arms aren’t level adjust the snap-
pins until they are (pins in same height-number hole).