Copyright © 2019 Aqua Creek Products All Rights Reserved
Revised 8/22/19
Linak Battery and Cables Installation
BATTERY
CONTROL BOX
Attach the battery to the control box and the control box
bracket. You should hear a “click” when the battery is
correctly mounted to the bracket.
See fi gure to the right.
Once the battery has been connected and
plugged into the control box, connect the
handset cable and the motor power cable
(if needed) in the fi rst two slots of the
control box. See fi gure to the right.
TAB TO
FRONT
HANDSET
CABLE
MOTOR
POWER
CABLE
1
2
MAKE SURE
PLUGS ARE
FULLY SEATED
AS SHOWN
BELOW
5