MULTISWITCH
Pin 3: D+
green wire
Pin 4: D-
white wire
Pin 5: VCC
red wire
4.4. aquabus (I
4.4. aquabus (I
4.4. aquabus (I
4.4. aquabus (I
2
2
2
2
C-Bus)
C-Bus)
C-Bus)
C-Bus)
3-pin add-on connector for optional add-on components by aqua-
computer. Only use cables specified by aqua-computer (not included in
delivery)!
Pin assignment:
Pin 1: GND
Pin 2: SDA
Pin 3: SCL
4.5. Jumpers
4.5. Jumpers
4.5. Jumpers
4.5. Jumpers
The five positions configure the different functions of the multiswitch™.
Appropriate short-circuit-bridges, so-called „Jumpers“, are included in
the delivery.
The individual functions may be derived from chapter 5. Configuration.
4.6. Power outputs 1/2
4.6. Power outputs 1/2
4.6. Power outputs 1/2
4.6. Power outputs 1/2
Screw clamps that allow the connection of up to eight consumer loads
to the power outputs of the multiswitch™. The outputs supply a
maximum of 12 V at a maximal 1 amp per channel. The total load
The total load
The total load
The total load must
must
must
must
not
not
not
not be higher than 40 Watts.
be higher than 40 Watts.
be higher than 40 Watts.
be higher than 40 Watts. Incorrect use may result in the destruction
Incorrect use may result in the destruction
Incorrect use may result in the destruction
Incorrect use may result in the destruction
of the multiswitch™ and/or the mainboard and further components!
of the multiswitch™ and/or the mainboard and further components!
of the multiswitch™ and/or the mainboard and further components!
of the multiswitch™ and/or the mainboard and further components!
Pin assignment: Terminal strip 1 contact 1:
Output 8 +12 V enabled
Terminal strip 1 contact 2:
Output 8 GND
Terminal strip 1 contact 3:
Output 7 +12 V enabled
Terminal strip 1 contact 4:
Output 7 GND
Terminal strip 1 contact 5:
Output 6 +12 V enabled
Terminal strip 1 contact 6:
Output 6 GND
Terminal strip 1 contact 7:
Output 5 +12 V enabled
Terminal strip 1 contact 8:
Output 5 GND
Terminal strip 2 contact 1:
Output 4 +12 V enabled
Terminal strip 2 contact 2:
Output 4 GND
Terminal strip 2 contact 3:
Output 3 +12 V enabled
- 6 -
Aqua Computer GmbH & Co. KG
© 2005-2012
Gelliehäuser Str. 1, 37130 Gleichen
