AQUADUCT
- allen key 2,0 mm
- dual PUR tube blue/black approx. 2,5 m
- PC circuit board
- USB cable approx. 2 m
- 15-pin aquaduct connection cable approx. 2 m
- ATX starter
- cable for rpm signal
- 2x 1000 ml Double Protect Ultra coolant
- aquasuite CD
- manual „aquaduct controlling unit“
- this manual
3.4. Optional accessory for aquaduct 240 PRO
3.4. Optional accessory for aquaduct 240 PRO
3.4. Optional accessory for aquaduct 240 PRO
3.4. Optional accessory for aquaduct 240 PRO mark III
mark III
mark III
mark III
- connection cable for flow sensor (order code 53027)
- flow sensor (order code 53061)
- flow sensor "high flow" (order code 53068)
3.5. Optional accessory for aquaduct 360 XT
3.5. Optional accessory for aquaduct 360 XT
3.5. Optional accessory for aquaduct 360 XT
3.5. Optional accessory for aquaduct 360 XT mark III and aquaduct
mark III and aquaduct
mark III and aquaduct
mark III and aquaduct
720 XT
720 XT
720 XT
720 XT
- aquaero power connect - 24 pin ATX standby power / ATX break (or-
der code 53047)
- temperature sensor (order code 53026)
- plug&cool temperature sensor (order code 53025)
4. Arranging the elements of the cooling system
4. Arranging the elements of the cooling system
4. Arranging the elements of the cooling system
4. Arranging the elements of the cooling system
On arranging the elements of the cooling system you should observe
the following essential points:
•
All elements have to be flown through sequentially one after the
other. A parallel assembly must not be carried out, since the al-
location of the water in the different hoses can hardly be pre-
dicted and single components could possibly not sufficiently be
cooled or even not at all.
•
The components can be in any order you like. This has (almost)
no influence on the cooling performance. Additionally it is worth
mentioning, that the difference in temperature of the coolant
© 2007-2009
Aqua Computer GmbH & Co. KG
- 9 -
Gelliehäuser Str. 1, 37130 Gleichen, Germany
