7
TEMPERATURE SCALE
With this setting you have the choice of the displayed temperature in Fahrenheit or Celsius.
Default setting is “F.”
DEFROST SELECTION
With this setting you can select whether defrosting shall be done in with air flow or by energizing the
reversing valve. By pressing either up or down you can toggle between “AIR DEFROSTING” or
“REVERSE CYCLE”. Default setting is “AIR DEFROSTING.”.
WATER SENSOR CALIBRATION
With this setting you can calibrate the water temperature reading. The calibration range is +/- 10 degrees F
or +/- 5 degrees Celsius.
Default setting is “0”.
EVAPORATOR SENSOR CALIBRATION
With this setting you can calibrate the evaporator temperature reading. The calibration range is+/- 10
degrees Fahrenheit or +/- 5 degrees Celsius. Default setting is “0”.
ELECTRONIC CONTROL PANEL
MODE SELECTION
NORMAL MODE
•
When power is applied, the heater will turn on in the last mode in which it was used.
•
User adjustable temperature range will be 50 to 95 degrees in Pool mode and 50 to 104
degrees in Spa mode.
▼
▲
LCD DISPLAY
Displays the actual pool/spa
temperature. In select mode
displays other parameters.
SELECT/SERVICE KEY
Used to select mode of
operation and enter service
mode.
INCREASE KEY
DECREASE KEY
POOL – HEAT
85◦
