KEYPAD LOCKOUT FEATURE
This feature will work as follows:
Setting the Lockout Code:
•
Press Select menu and hold it pressed AND power the control up.
•
Then control will show the spacing for two digits “_ _” from cover value from 00 to 99.
•
The user enters the desired code and presses SELECT to save value.
Factory default value is 20.
Locking Process:
•
To lock the keypad user will press SELECT button for 5 seconds
and display will show spacing for a two digit code “_ _”
•
User presses the Up or Down buttons to enter the code saved
from the setup of the lockout feature value from 00 to 99.
•
User will enter the code according to the pre-set code.
•
Control will be shipped with pre-set code of 20.
•
User presses SELECT button and control flashes LOC 3 times
then show – and switches to show water temperature.
•
Each time user presses a button the control will show “LOC”
for 3 seconds and then show water temperature.
Unlocking Process:
•
To unlock the keypad user will press SELECT button for 5 seconds and
display shows spacing for a two digit code “_ _” at the right hand side
•
User enters the saved code value and presses SELECT button
•
If correct code is entered then control switches to show water temperature
•
If incorrect code is entered then control will flash “LOC” for 3 seconds and switch back to “_ _”
•
If nothing is entered for the next 5 seconds then control
will switch to show water temperature and remains locked.
26
ACS XL Heat Pump Pool Heater Installation Manual