Pivoting Extension Boom
4
3 PRESENTATION
Pivoting extension pivot swing booms are designed to extend the working area of local extraction
devices. They make it possible to reach areas where impurities are being created with, for example,
a self-supporting arm, flexible hoses, hose reels etc. Due to a wide range of reaches, the booms
are especially useful for the extraction of dust or gas impurities from difficult to reach areas.
Additionally the booms can be used to suspend other equipment such as welding wire feeders,
hose reels etc. within the range of permissible loads.
3.1 Each MAXIREACH unit includes:
• Boom base with wall/column support plates.
• Horizontal painted steel tube(s) support.
• Lateral support beam for horizontal steel tube.
• Spiral ducting and flexible hose connections with hose clamps.
• Flexible hose for exhaust duct connection.
• Support bracket at end of boom for MAXAIR fume arm or MAXIDROP hose drop system.
• 3 steps paint finish: degreasing, prime coat and polyurethane final coat.
The MAXIREACH-BD swing boom is shipped partly assembled but requires minimal final field
assembly. Because of carrier restrictions, swing booms horizontal steel tubes longer than 10' (3
meters) are shipped in two (2) pieces. A joiner with fasteners is included for field assembly.
4 MODEL NUMBERS
Models
Number
Diameter
X Length
Weight
Lb / Kg
Suggested Air Volume vs S.P.
in. / pascals
(Regardless of length)
EBC-605
6" x 60" (150 mm x 1500 mm)
90/40
700 / 800 C.F.M. (330 /375 L/s) 0.60 / 0.75"/ 150 / 175pa
EBC-610
6" x 120" (150 mm x 3000 mm)
150/68
EBC-615
6" x 180" (150 mm x 4500 mm)
195/88
Models
Number
Diameter
X Length
Weight
Lb / Kg
Suggested Air Volume vs S.P.
in. / pascals
(Regardless of length)
EBC-805
8" x 60" (200 mm x 1500 mm)
100/45
900 / 1000 C.F.M. (420 / 470 L/s) 0.90 / 1.25"/ 225 / 315pa
EBC-810
8" x 120" (200 mm x 3000 mm)
175/80
EBC-815
8" x 180" (200 mm x 4500 mm)
220/100
