Wet type dust collector
4
3 FEATURES OF THESE SCRUBBERS
Figure 3 shows the water control system. Water pressure of 50 to 60 psi is recommended. The ball
valve water control is always run with the fan, and is always open when the unit is operational. The
filling water valve, which is always closed when the unit is working is used to rapidly fill the unit to
static level.
The water inlet is threaded for convenience in connecting to the main water system. The ball valve
assembly with its float can be seen through the inspection window. The static water level is at the
bottom of the window and this is where you will record the working water level. When the fan is
turned on, the arm of the ball may have to be adjusted to the working water level.
Figure 1
AIR OUTLET
DOWNTIME
BLOWER EXHAUST
WATER INLET
OVERFLOW
DRAIN
Note:
Air inlet an opposite side.
AIR
INLET
Summary of Contents for MAXIHYDRO MS
Page 8: ...Wet type dust collector 8...
Page 9: ...Wet type dust collector 9...
Page 10: ...Wet type dust collector 10...
Page 11: ...Wet type dust collector 11...
