Double-Sided Curtains
10
A) Pull the curtains on left and right sides until they are completely closed,
and install the two Curtain Drivers at the position on the rod where the
curtains are completely closed according to the installation method for
the "single-sided curtains".
C)Meanwhile, the Curtain Driver will automatically run to the opening
limited point and stop after being pulled in the fully opening direction
for about 10cm. After the long "beep", another limit point is automatical-
ly and successfully set, which means the opening range of the device is
set up.
About
10cm
The device starts running automatically
The last limit point (fully opened position)
