
GENERAL DESCRIPTION
This product specification establishes the requirements for a combined control capable of controlling the
following products:
!
Hot Dog Roller Grill
- The unit controls time & temperature in two (2) zones of a roller grill for a
preheat function, a HEAT function for a specified time at a higher temperature, and an automatic
switch at a preset time to a lower HOLD temperature. A daughter board attachment allows heating a
bun compartment and a Power Limit Technology insures units with bun warmers don’t exceed a
maximum current draw. And a special transition from HEAT to HOLD prevents rapid cool-down of
product during the transition.
HOT DOG GRILL CONTROL
!
Control Concept - Hot Dog -
When the DIP-switch is selected for Hot Dog, the control consists of
the control plus two (2) output boards. The output boards are selected based on the electrical load.
If a bun warmer is attached, then an additional output board is required.
5:15
150
HEAT
HEAT
HOLD
HOLD
1
2
Operating Example
In this example:
ZONE 1:
Hot dogs are in hold at
150°F. The element is cycling.
ZONE 2:
Hot dogs have 5 min, 15 sec
r e m a i n i n g i n h e a t c y c l e
before they are ready. Element
is currently cycling.
BUNS:
The bun warmer element is
cycling.
88:88
HEAT
HOLD
88:88
HEAT
HOLD
SM
SM
HOT DOG
(Low Amp)
88:88
HEAT
HOLD
88:88
HEAT
HOLD
LG
LG
HOT DOG
(High Amp)
88:88
HEAT
HOLD
88:88
HEAT
HOLD
SM
SM
SM
HOT DOG
(Low Amp w/Bun Warmer)
LG
LG
SM
88:88
HEAT
HOLD
88:88
HEAT
HOLD
HOT DOG
(High Amp w/Bun Warmer)
HEAT
HOLD
OFF mode. The hot dog unit has been turned on, no buttons pushed.
Screens are blank. LED indicators are off.
HEAT
HOLD
Press desired zone button. Preheats that zone. Indicator LED on to show
those rollers are active. Press ZONE key to bypass PREHEAT and cycle
to COOK.
HEAT
HOLD
When unit reaches temperature, it indicates it is ready. Beeps 1 long time.
HEAT
HOLD
From RDY, customer presses zone button to start COOK cycle.
Display: >60 minutes [HH:MM] (colors flash)
<60 minutes [MM:SS]
In MM:SS mode the user will intuitively know the time is
. In
the example, 5m, 15s until done with COOK.
decrementing
GENERAL OPERATION - HOT DOG
Once programmed, this is how the control will operate. This applies to both zones. See next section for
adjusting the TIME and TEMPERATURE settings.
1
1
1
1
8
Summary of Contents for HR-
Page 26: ...NOTES 26...