APW Wyott DWC13, Installation And Operating Instructions

Page: 2 / 4

2
INSTALLATION INSTRUCTIONS
OPERATING INSTRUCTIONS
DAILY CLEANING INSTRUCTIONS
SPECIFICATIONS
REPLACEMENT PARTS LIST
1. UNPACK. There should be on cabinet and two shelves.
2. Check for loose or damaged parts.
3. Plug the unit into a 230V outlet.
4. Check to see that the light turns on and that the unit heats up.
1. Turn on unit.
2. Set dial between "1 & 2” (see "KNOB SETTING" diagram).
3. Let warm up for 1 hour.
4. For less heat, turn down (CCW).
To increase heat, turn up (CW).
5. When done, turn off unit.
1. Turn unit off and unplug the unit from the power outlet.
2. Doors may be removed for cleaning.
3. Clean the cabinet with soapy water and a soft cloth. Do not use chemicals such as ammonia,
alcohol, or chlorine to clean the cabinet. The door and sides are made of plastic, and these
chemicals will cause cracking. The plastic sides are easily scratched, so be sure to use something
soft to wash them.
4.
5. The shelves are stainless steel, and may be machine washed.
POWER: 230V, 550W, 50/60HZ
OVERALLDIMENSIONS: 12 W' Wide x 12 Deep x 20 ~" High
INSIDE DIMENSIONS: 12" Wide x 12 W' Deep x 11 5/8" High
CORDSET: 5 FT, 3 GROUNDED WIRE CORD
FOR APPLIANCES WITH TYPE Y ATTACHMENT: IF THE SUPPLY CORD IS DAMAGED,
IT MUST BE REPLACED BY THE MANUFACTURE OR ITS SERVICE AGENT OR A SIMILARLY
QUALIFIED IN ORDER TOAVOIDAHAZARD.
SHIPPING WEIGHT: 25 Ibs.
APPROVALS: ULEPH (NSF 4), CE
DO NOT IMMERSE CABINET IN WATER. DO NOT JET SPRAY CABINET. DO NOT PUT
CABINET INADISHWASHER.
3/t"
NOTE:
1
2 3
4
5
ITEM PART NUMBER DESCRIPTION
1 Stainless Steel Shelf
2 Adjustment Knob (0-5)
4 Door Knob
4a Screw for Door Knob (Need 11/ea)
5 Door
6 Striker Plate (for Door Magnet)
7 Door Hinge
7a Screw for Door Hinge (Need 2/ea)
7b Screw for Frame Hinge (Need 2/ea)
8 Shelf Rod
8a Shelf Rod Screws
9 Door Magnet
9a Screw for Door Magnet (Need 2/ea)
66922
89499
3 70801001 Lamp 230v 40W Philips P45 E14 European
89165
89029
66931
66923
66937
88984
88856
66933
88993
66936
88854