GLOBE VALVES OS & Y - FORGED - ISO 15761/API 602/B16.34
Australian Pipeline Valve - Installation, Operation and Maintenance Manual
4
S A F E T Y I N F O R M A T I O N
The following general safety information should be taken in account in addition to the specific warnings
and cautions specified in this manual. They are recommended precautions that must be understood and
applied during operation and maintenance of the equipment covered in this I.O.M.
To avoid injury, never attempt disassembly while there are pressures either
upstream or downstream. Even when replacing stem packing, caution is necessary
to avoid possible injury. Disassemble with caution in case all pressures are not
relieved.
To prevent valve bending, damage, inefficient operation, or early maintenance
problems, support piping on each side of the valve. Warning, certain gases and
fluids could cause damage to human health, the environment or property hence the
necessary safety precautions to prevent risk should be taken.
• A valve is a pressurised mechanism containing fluids under pressure and
consequently should be handled with appropriate care.
• Valve surface temperature may be dangerously too hot or too cold for skin contact.
• Upon disassembly, attention should be paid to the possibility of releasing
dangerous and or ignitable accumulated fluids.
• Ensure adequate ventilation is available for service.
This manual provides instructions for storing, general servicing, installation and removal of globe valves.
APV and it’s resellers refuse any liability for damage to people, property or plant as well as loss of
production and loss of income under any circumstances but especially if caused by: Incorrect installation
or utilisation of the valve or if the valve installed is not fit for intended purpose. It is the sole
responsibility of the user to ensure the valve type and materials are correctly specified.
