APURO CD400-A, Instruction Manual

Page: 5 / 8

4
Telephone Helpline : 1 888 747 1447
Cleaning, Care & Maintenance
• Do not use any abrasive cleaning agents on the appliance. Use warm soapy water.
• Do not immerse the motor housing in water. Clean the exterior with a damp cloth.
• A Apuro agent or qualified technician should carry out repairs if required.
For ease of cleaning, disassemble the appliance:
• Unscrew the barrel cap.
• Remove the mincing barrel, plate, blade and feed screw as one unit. Gently tip the barrel to remove
the pieces one by one.
• Twist off the hopper tray.
• Remove meat from all components and wash in warm, soapy water.
• Always dry thoroughly after cleaning.
• Lubricate the parts with a little cooking oil before replacing for best performance.
Troubleshooting
If your Apuro appliance develops a fault, please check the following table before making a call to the
Helpline.
Note: Always switch off and disconnect the appliance from the power supply before
cleaning.
Note: If the cap has been put on too tight, knock the corners of the cap with a rubber
mallet or similar instrument to loosen it.
Fault Probable Cause Action
The appliance is not working The appliance is not switched
on Check the appliance is plugged in
correctly and switched on
Plug and lead are damaged Call Apuro agent or qualified
technician
Fuse in the plug has blown Replace the plug fuse
Power supply Check power supply
Internal wiring fault Call Apuro agent or qualified
technician
Minced meat does not exit the
appliance evenly The barrel cap is on too tight Loosen the cap
The cutting plate is blocked Remove and clean the plate
The cutting blade is blunt Replace the cutting blade