6
48VDC battery connection diagram
3. Insert the ring terminal of battery cable flatly into battery connector of inverter and make sure the nuts are
tightened with torque of 5 Nm. Make sure polarity at both the battery and the inverter/charge is correctly
connected and ring terminals are tightly screwed to the battery terminals.
WARNING:
Shock Hazard
Installation must be performed with care due to high battery voltage in series
CAUTION!!
Do not place anything between the flat part of the inverter terminal and the ring terminal.
Otherwise, overheating may occur.
CAUTION!!
Do not apply anti-oxidant substance on the terminals before terminals are connected tightly.
CAUTION!!
Before making the final DC connection be sure positive (+) must be connected to positive (+) and
negative (-) must be connected to negative(-).
