CPS100 SERIES OPERATION MANUAL
SECTION 6:
Entire Contents Copyright
2018 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
APS CPS100 Series Power Source Operation Manual
Page 127 of 231
Running the IEC 4-13 Individual Harmonics test
Return to the previous IEC 4-13 menu by
pressing the [Esc] key.
Press the
Load
soft key to apply the test to
the unit under test. Once pressed, it changes
to
Stop
.
The test will now run until completed. Total
test time is determined by the Class and
Level settings.
The test time count down in seconds is
visible in the upper part of the IEC 4-13
screen.
At the completion of the test, the
Stop
soft
key will revert to
Load
. To abort a test in
progress, press the
Stop
soft key during a
test run
