20
Pic5.12 Internet monitoring solution
6. Startup and Shutdown
Before starting the inverter need to ensure that meet the following conditions,
otherwise may cause fire or damage to the inverter without quality assurance at
the same time the situation on our company does not undertake any
responsibility. At the same time, to optimize the system configuration, it is
recommended that the two inputs be connected to the same number of PV
modules.
a). The maximum open voltage of each set of PV modules shall not exceed
1000VDC under any conditions.
b). Each input of the inverter must use the same type of PV module in series.
c). Total output power of PV shall not exceed the maximum input power of
inverter, each PV modules shall not exceed the rated power of each channel.
d). The short circuit current of each series of PV modules cannot be greater
than 18A at any time.
20
