PERIODIC MAINTENANCE
2 - 8
TUONO 1000
2.1.3. LUBRICANT
TABLE
LUBRICANT
PRODUCT
Engine oil
RECOMMENDED:
EXTRA RAID 4, SAE 15W – 50 or
TEC 4T
SAE 15W – 50.
As an alternative to recommended oils, top brand oils meeting or exceeding
CCMC G-4, A.P.I. SG specifications can be used.
Front fork fluid
RECOMMENDED: F.A. 5W or
F.A. 20W or
FORK 5W or
FORK 20W.
When you wish to obtain an intermediate response between those offered
by
F.A. 5W and
F.A. 20W or
FORK 5W or
FORK
20W oils, you may mix the different products as follows:
SAE 10W =
F.A. 5W 67% of
F.A. 20W 33% of volume or
FORK 5W 67% of
FORK 20W 33% of volume.
SAE 15W =
F.A. 5W 33% of
F.A. 20W 67% of volume or
FORK
5W 33% of
FORK 20W 67% of volume.
Bearings and other
lubrication points
RECOMMENDED:
Bimol Grease 481,
AUTOGREASE MP or
Grease 30.
As an alternative to recommended grease, use top brand rolling bearing
grease that will resist a temperature range of -30 °C ... +140 °C (-22
°F….+284 °F) , with dropping point 150 °C ...230 °C (+302 °F….+446 °F),
high corrosion protection, good resistance to water and oxidisation.
Battery terminals
Neutral grease or Vaseline.
Chains
RECOMMENDED aerosol chain lubricant:
CHAIN SPRAY or
CHAIN LUBE.
Brake fluid
RECOMMENDED:
Autofluid FR. DOT 4 (braking system is also DOT 5
compatible) or
BRAKE 5.1 DOT 4 (braking system is also DOT 5
compatible).
NOTE
Use only new brake fluid. Never mix different brands or types of
brake fluid unless you have determined that bases are compatible.
Clutch fluid
Autofluid FR. DOT 4 (clutch system is also DOT 5 compatible) or
BRAKE 5.1 DOT 4 (braking system is also DOT 5 compatible).
NOTE
Use only new clutch fluid.
Engine coolant
RECOMMENDED:
ECOBLU – 40°C or
COOL.
NOTE
Use nitrite-free and anticorrosion coolant only to ensure protection at
at least 35°C (-31 °F).
Summary of Contents for TUONO 1000 R
