manualshive.com logo in svg

APRILIA SR MAX 300 i.e., Manual

Share
Download
APRILIA SR MAX 300 i.e. Manual Download Page 33

02_04

02_05

Shock absorber adjustment (02_04, 02_05)

The preloading of the springs can be adjusted to 4 positions acting on the ring nut
located in the lower part of the shock absorbers with the specific spanner supplied.

Position 1

: minimum preload: rider only

Position 2

 medium preloading: rider only

Position 3

 medium preloading: rider and passenger

Position 4

: maximum preloading: rider, passenger, and luggage.

In order to carry out this operation you will need to use the specific spanner in the kit.
Spring preloading increases by turning the ring nut towards «

A

», but decreases if the

ring nut is turned towards «

B

».

CAUTION

RIDING THE VEHICLE WITH THE SPRING PRELOADING NOT CORRECTLY SET
FOR THE RIDER AND POSSIBLE PASSENGER, COULD REDUCE THE COM-
FORT OF THE RIDE AND THE PRECISION OF THE STEERING.

WARNING

WE RECOMMEND WEARING GLOVES WHILE CARRYING OUT THIS OPERA-
TION IN ORDER TO AVOID INJURIES.

WARNING

IT IS ABSOLUTELY FORBIDDEN TO ADJUST THE PRELOAD DIFFERENTLY ON
THE TWO SHOCK ABSORBERS

33

2 Use

Summary of Contents for SR MAX 300 i.e.



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands