manualshive.com logo in svg

APRILIA SR MAX 300 i.e., Manual

Share
Download
APRILIA SR MAX 300 i.e. Manual Download Page 20

01_16

Accessing the fuel tank (01_16)

To remove the fuel tank cover «

A

» lift tab «

B

» and insert the key in lock «

C

».

The immobilizer system

In order to enhance theft protection, the vehicle is equipped with a «

PIAGGIO IMMO-

BILIZER

 » electronic engine locking device that is activated automatically when the

ignition switch is removed. Upon start-up, the «

PIAGGIO IMMOBILIZER

» system

checks the starter key, and only if this key is recognised will the Immobiliser system
allow the vehicle to be started.

01_17

Keys (01_17)

Two types of keys are supplied together with the vehicle. The red-handgrip key is the
«

MASTER

» key. Only a single copy of this key is supplied, which is necessary to

program the codes for all your other keys and for your dealer to perform some main-
tenance operations. We therefore recommend that it be used only under exceptional
circumstances.

The black-handgrip key is used for normal operations and for:

- start-up / saddle opening

- unlocking the fuel tank cover

20

1 Vehicle

Summary of Contents for SR MAX 300 i.e.



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands