APRILIA SR 50 - 2001, Manual

Page: 72 / 104

72
use and maintenance SR 50
INSTALLING THE REAR
MUDGUARD EXTENSION
Carefully read p. 55 (MAINTENANCE).
♦ Place the vehicle on the center stand.
Before carring out the following opera-
tions, let the engine and the exhaust
silencer cool down until they reach room
temperature, in order to avoid burns.
♦ Grasp the bulb socket (1), pull and take it
out of its seat.
♦ Release the license plate light cable (2)
from the two clips (3).
♦ Unscrew and remove the two nuts (4).
♦ Remove the license plate light (5).
♦ Unscrew and remove the nut (6).
♦ Withdraw the screw (7).
♦ Position the rear mudguard extension (8)
inside the number plate holder support (9).
♦ Position the license plate light (5) correctly
on the mudguard seat.
♦
Screw and tighten finger tight the two nuts
(4).
♦
Position the bulb socket (1) correctly in its
seat.
♦
Insert the license plate light cable (2) in the
two clips (3).
NOTE
We have not ever completly
tightened nut (6). It is only finger tightened
above.
♦ Insert the screw (7) and tighten finger tight
nut (6).
♦ Make sure that the rear mudguard
extension (8) is positioned correctly.
♦ Tighten the two nuts (4).
♦ Tighten the screw (7).
WARNING
3
4
1
5
2
4
7
9
5
8
6
4