manualshive.com logo in svg

APRILIA SR 50 - 2001, Manual, Page: 45 / 104

Share
Download
APRILIA SR 50 - 2001 Manual Download Page 45

45

use and maintenance

SR 50

INSTRUCTIONS FOR USE

WARNING

WARNING

Carefully read p. 5 (WARNINGS -
PRECAUTIONS - GENERAL ADVICE).

Before you ride away, always do a pre
ride check to make sure that all
systems are working properly and safe,
see p. 46 (PRELIMINARY CHECKING
OPERATIONS).
Failure to follow this warning can lead to
engine seizure, handling instabilities or
other problems which can result in an
upset and subsequent serious injury or
even death.

Do not hesitate to consult your Local

aprilia

 Delear in case there is something

you do not understand about the
functioning of some controls or in case
you suspect or discover some
irregularities.
It does not take long to carry out a check-
up and this operation ensures you much
more safety.

Failure to perform the checks described
above may cause accidents or make the
vehicle overturn, with consequent
serious injuries or even death.

If the throttle sticks open, it may cause
a collision with another vehicle, or an
upset.

If the throttle sticks, kill the engine with
the engine stop switch located on the
right handlebar.
Do not attempt to restart the engine until
the throttle has been repaired and works
perfectly. Failure to obey this warning can
lead to a runaway with seriously injuries
or even death.

If any fastener is loose, the rider may
lose control of the vehicle and risk and
accident.

Both situations may cause serious
injuries or even death.

Summary of Contents for SR 50 - 2001









































































































Reviews:

No comments