56
use and maintenance
Sonic 50
CHECKING AND CLEANING THE
TERMINALS
Carefully read p. 55 (BATTERY).
◆
Remove the inspection cover, see p. 52
(REMOVING THE INSPECTION COV-
ER).
◆
Make sure that the cable terminals (1)
and the battery terminals (2) are:
√
in good conditions (and not corroded
or covered with deposits);
√
covered with special grease or Vase-
line.
If necessary:
◆
Make sure that the ignition switch is in
position
≈
∆
.
◆
Disconnect first the negative (
√
) and then
the positive cable (+).
◆
Brush with a wire brush to eliminate any
sign of corrosion.
◆
Reconnect first the positive (+) and then
the negative cable (
√
).
◆
Cover the terminals with special grease
or Vaseline.
REMOVING THE BATTERY
Carefully read p. 55 (BATTERY).
◆
Remove the inspection cover, see p. 52
(REMOVING THE INSPECTION COV-
ER).
◆
Make sure that the ignition switch is in
position
≈
∆
.
◆
Disconnect first the negative (
√
) and then
the positive cable (+).
◆
Remove the battery breather pipe.
◆
Remove the battery from its compart-
ment and put it on a flat surface, in a cool
and dry place.
Once it has been removed, the
battery must be stored in a safe
place and kept away from chil-
dren.
Summary of Contents for SCARABEO 50 I.E 100 4T - 2002
