24
use and maintenance SL mille
-!). ).$%0%.$%.4 #/.42/,3
#/.42/,3 /. 4(% ,%&4 0!24
/& 4(% (!.$,%"!2
NOTE
The electrical parts work only when the ignition switch is
in position “
n
”.
1) HORN PUSH BUTTON (
f
)
The horn is activated when the push button is pressed.
2) DIRECTION INDICATOR SWITCH (
c
)
To indicate the turn to the left, move the switch to the left; to
indicate the turn to the right, move the switch to the right.
To turn off the direction indicator, press the switch.
3) DIMMER SWITCH (
b
-
a
)
When the light switch is in position “
o
”: if the dimmer switch
is in position “
a
”, the high beam comes on, while if it is in po-
sition “
b
”, the low beam comes on.
3) DIMMER SWITCH (
b
-
a
)
_
When it is in position “
b
” the parking lights, the dashboard
light and the low beam are always on.
When it is in position “
a
”, the high beam comes on.
4) HEADLIGHT SWITCH (
o
-
p
-
•
)
(not provided in the
_
version)
When the light switch is in position “
•
”, the lights are off; when
the switch is in position “
p
”, the parking lights and the dash-
board light are on; when the switch is in position “
o
”, the
parking lights, the dashboard light and the low beam are on.
The high beam can be operated by means of the dimmer
switch.
5) HIGH BEAM SIGNALLER PUSH BUTTON (
a
) /
LAP (multifunction)
NOTE
For the setting of the functions, see p. 18 (MULTI-
This push button makes it possible to use the high beam sig-
naller in case of danger or emergency, or displays the various
preset functions on the right multifunction display:
– hour and minutes;
– coolant temperature (°C or °F);
– chronometer.
Ing-01.fm Page 24 Friday, December 17, 1999 11:14 AM
