42
use and maintenance
RSV mille TUONO
- RSV mille R TUONO
SETTING THE RED LINE THRESHOLD
(WITH ENGINE OFF ONLY)
W h e n t h e m a x i m u m r p m s e t i s
exceeded, the red line warning light
L E D “
m a x
” ( 2 ) p o s i t i o n e d o n t h e
dashboard starts blinking.
If the push button
is pressed for less
than one second, the pointer of the
revolution counter (4) shifts to the red line
value set for three seconds, after which it
returns to its initial position.
For the adjustment, proceed as follows:
◆
Press the push button
, release it and
press it
again within 3 seconds. The
pointer (4) moves increasing the value
by 1000 rpm at each click, as long as
is kept pressed; when it has reached the
maximum value, it starts again from the
beginning.
◆
Press the push button
until the
desired rpm value has been set.
◆
If the push button
is released and then
p r e s s e d a g a i n w i t h i n 3 s e c o n d s ,
intermittently, the pointer (4) moves
increasing the value by 100 rpm at each
click; when it has reached the maximum
value, it starts again from the beginning.
NOTE
It is not possible to set the red
line at values lower than 2000 rpm or
higher than 12000 rpm.
Never exceed the recommended rpm,
see p. 80 (RUNNING-IN).
◆
To confirm, release the push button
.
A f t e r t h r e e s e c o n d s , t h e r e d l i n e
threshold setting is stored.
NOTE
The setting is confirmed by the
coming on of the red line warning light LED
“
max
” (2).
MILLE_02_USA.FM Page 42 Monday, August 5, 2002 9:56 AM