manualshive.com logo in svg

APRILIA RSV 1000 TUONO R, Manual

Share
Download
APRILIA RSV 1000 TUONO R Manual Download Page 50

50

use and maintenance   

RSV 1000 TUONO R

MOVING OFF - RIDING

WARNING

T h e   v e h i c l e ' s   e n g i n e   d e l i v e r s
considerable power. Familiarise with the
vehicle gradually and use the greatest
care.
Do not position any object inside the
front fairing (between the handlebar and
the instrument panel), in order not to
hinder the rotation of the handlebar and
visibility toward the instrument panel.

NOTE 

Before moving off, carefully read

the “safe drive” chapter, see page 5 (SAFE
DRIVE).

CAUTION

If the low fuel light “

” (1) on the

i ns t r u m e n t   p a n e l   c o m e s   on   wh i l e
vehicle is running, it means that you
still have 4,5 ± 1 

b

 of fuel in the tank.

Provide for topping up as soon as
possible, see page 29 (FUEL).

WARNING

If you ride without passenger, make
sure that the passenger footrests are
folded.

CAUTION

While riding, keep your hands on the
grips and your feet on the footrests.
NEVER RIDE IN ANY POSITION OTHER
THAN THOSE INDICATED.

WARNING

If you ride with a passenger, instruct
him/her so that he/she does not create
problems during manoeuvres.
Before leaving, make sure that the
stand is completely up.

To leave: 

u

Start the engine, see page 48
(STARTING).

u

Adjust the inclination of the rear-view
mirrors correctly.

CAUTION

With the vehicle at rest, try to get
acquainted with the use of the rear-view
mirrors. The r efle cting sur f ace  is
convex, therefore the objects seem to
be farther away than they actually are.
These mirrors offer a “wide-angle”
view. It may take some time to learn to
accurately judge the distance of traffic
behind.

u

With released throttle grip (2) (

Pos.A

) and

engine idling, pull the clutch lever (3)
completely.

u

Engage the first gear, by pushing the
gear lever (4) downwards.

u

Release the brake lever (pulled on the
starting).

1

2

3

4

APRum_TUONO_MY05_01_UK.book  Page 50  Monday, September 26, 2005  5:15 PM

Summary of Contents for RSV 1000 TUONO R

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands