manualshive.com logo in svg

APRILIA Mana GT ABS 2012, Manual

Share
Download
APRILIA Mana GT ABS 2012 Manual Download Page 59

•

During the first 100 Km (62 miles) use the brakes gently, avoiding sudden or
prolonged braking. That is to permit the adequate adjustment of the pad fric-
tion material to the brake discs.

AFTER THE SPECIFIED MILEAGE, TAKE YOUR VEHICLE TO AN Official Aprilia
Dealer FOR THE CHECKS INDICATED IN THE "AFTER-RUN-IN" TABLE IN THE
SCHEDULED MAINTENANCE SECTION TO AVOID INJURING YOURSELF, OTH-
ERS AND /OR DAMAGING THE VEHICLE.

03_09

03_10

Starting up the engine (03_09, 03_10, 03_11, 03_12, 03_13,
03_14)

THIS VEHICLE HAS REMARKABLE POWER AND SHOULD BE USED GRADU-
ALLY AND WITH MAXIMUM CAUTION.

Do not carry objects in the top fairing (between the handlebar and the instrument
panel) so that handlebar can turn freely and the instrument panel is visible at
all times.

FAILURE TO OBSERVE THIS WARNING COULD LEAD TO UNCONSCIOUSNESS
AND EVEN DEATH DUE TO SUFFOCATION.

EXHAUST FUMES CONTAIN CARBON MONOXIDE, AN EXTREMELY HARMFUL
SUBSTANCE IF INHALED.

NEVER START THE ENGINE IN A CLOSED OR INSUFFICIENTLY VENTILATED
SPACE.

59

3 Use

Summary of Contents for Mana GT ABS 2012





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands